Methodological Principles for Establishing Tactical and Technical Requirements for Mobile Maintenance and Repair Vehicles for Military Motor Vehicles and Motorcycles
Abstract
Purpose. To develop a methodological approach to assessing the repair capacity of mobile maintenance and repair (M&R) units, taking into account the labor intensity of repair operations, required throughput, and potential operational scenarios.
Method. The study employs systems analysis, mathematical modeling, scenario-based analysis, and comparative assessment methods. The proposed approach determines productive labor requirements based on the expected number of repair operations and their average labor intensity. The required throughput is calculated by considering the rate of repair completion within a specified time period.
Results. A calculation-based approach has been developed to determine the required effective labor capacity and throughput of mobile M&R units. A repair capacity utilization coefficient is proposed, defined as the maximum of two ratios: required to available labor capacity and required to available throughput. This approach makes it possible to identify potential constraints on repair capabilities under different operational scenarios and assess whether available resources are sufficient to meet established requirements.
Practical implications. The proposed approach can be applied to justify the composition of repair equipment, determine maintenance personnel requirements, plan the workload of mobile M&R units, and assess their ability to complete specified repair operations within established time limits.
Research limitations. The practical application of the proposed calculation methods requires validation of input parameters using experimental results, operational data, or validated models of repair processes.
Article type: Research article with a methodological focus.
Downloads
References
Chereushenko, B. (2026). Method for Prioritising Mobile Maintenance Assets for Automotive and Motorcycle Repair Units. Social Development and Security, 16(4), 401–419. https://doi.org/10.33445/sds.2026.16.4.24
Chereushenko, B. V. (2025). Analiz mobilnykh zasobiv tekhnichnoho obsluhovuvannia i remontu avtomobilnoi ta mototekhniky u suchasnykh boiovykh umovakh [Analysis of mobile maintenance and repair assets for automotive and motorcycle vehicles in modern combat conditions]. Collection of Scientific Works of Odesa Military Academy, 2(24) 12-22. https://doi.org/10.37129/2313-7509.2025.24.2
Chernenko, P. V., Nikonenko, A. M., & Parii, S. H. (2026). Suchasni rukhomi remontni maisterni avtobronetankovoi tekhniky – kliuch do peremohy u viini [Modern mobile armoured vehicle repair workshops as a key to victory]. Scientific Notes of V. I. Vernadsky Taurida National University. Series: Technical Sciences, 37(76)(1), 402–408. https://doi.org/10.32782/2663-5941/2026.1.1/50
Chopa, D. A., Derevianchuk, A., Moskalenko, D., & Zhuravlov, A. (2024). Pidkhid shchodo informatsiinoho zabezpechennia remontno-vidnovliuvalnykh robit iz zrazkamy ozbroiennia ta viiskovoi tekhniky na osnovi tekhnolohii dopovnenoi realnosti [Information support for repair and recovery works using augmented reality]. Modern Information Technologies in the Sphere of Security and Defence, 50(2), 85–95. https://doi.org/10.33099/2311-7249/2024-50-2-85-95
Department of the Army. (2024). ATP 4-33: Maintenance operations. Headquarters, Department of the Army. https://cascom.army.mil/asrp/doctrine-pubs.html
Hrubel, M. H., Parashchuk, D. L., Voloshchuk, M. Ya., & Shulhin, A. V. (2024). Metodyka tekhnichnoho diahnostuvannia zrazkiv viiskovoi avtomobilnoi tekhniky [Methodology for technical diagnostics of military vehicles]. Scientific Works of the State Scientific Research Institute of Armament and Military Equipment Testing and Certification, 1(19), 25–34. https://doi.org/10.37701/dndivsovt.19.2024.03
IEC. (2025). IEC 60300-3-10:2025 Dependability management – Part 3-10: Application guide – Maintainability and maintenance. International Electrotechnical Commission. https://webstore.iec.ch/en/publication/65334
Ilkström Kravcov, A., Rautio, S., Vlkovský, M., Rodriguez, M. H., Khoshnaw, F., & Šlajs, T. (2026). Utilization of Additive Manufacturing for Rapid Repair in Military Applications. Advances in Military Technology, 21(1), 325–344. https://doi.org/10.3849/aimt.02032
ISO. (2024a). ISO 55000:2024 Asset management – Vocabulary, overview and principles. International Organization for Standardization. https://www.iso.org/standard/83053.html
ISO. (2024b). ISO 55001:2024 Asset management – Asset management system – Requirements. International Organization for Standardization. https://www.iso.org/standard/83054.html
Kokhan, V. F. (2024). Shliakhy udoskonalennia metodolohichnykh i praktychnykh pidkhodiv v ukomplektuvanni viiskovoiu avtomobilnoiu tekhnikoiu Syl oborony Ukrainy [Ways to improve methodological and practical approaches to equipping the Defence Forces of Ukraine with military vehicles]. Weapon Systems and Military Equipment, 3(79), 15–21. https://doi.org/10.30748/soivt.2024.79.02
Ministry of Defence of Ukraine. (2024). Metodyka rozrakhunku vartosti zhyttievoho tsyklu zrazkiv ozbroiennia, viiskovoi ta spetsialnoi tekhniky [Methodology for calculating the life-cycle cost of weapons, military and special equipment], Order No. 106 of 12 February 2024. https://zakon.rada.gov.ua/laws/show/z0464-24
Mohril, R. S., Solanki, B. S., Majumdar, J., Lad, B. K., & Kulkarni, M. S. (2024). Novel Selective Maintenance Approach to Ensure Mission Reliability of Armored Vehicles Considering Multiple Deployment Roles in Distinct Operating Profiles. Defence Science Journal, 74(4), 447–459. https://doi.org/10.14429/dsj.74.19370
NATO Standardization Office. (2025). AJP-4: Allied joint doctrine for sustainment of operations (Edition C, Version 1). https://www.gov.uk/government/publications/allied-joint-doctrine-for-sustainment-of-operations-ajp-4
Partyka, S. P. (2025). Rukhomi zasoby tekhnichnoho obsluhovuvannia ta remontu tekhniky yak osnovna skladova systemy remontu [Mobile maintenance and repair assets as a major component of the repair system]. Collection of Scientific Works of the National Academy of the State Border Guard Service of Ukraine. Series: Military and Technical Sciences, 97(4), 111–119. https://doi.org/10.32453/3.v97i4.1602
Pavlov, Y. (2025). An Improved Model of the Actions of the Repair Units of the National Guard of Ukraine Following the Procedure for the Search, Evacuation, and Repair of Damaged Automotive and Armored Vehicles. Social Development and Security, 15(5), 102–113. https://doi.org/10.33445/sds.2025.15.5.8
Pavlov, Ya. V. (2023). Otsiniuvannia efektyvnosti funktsionuvannia systemy vidnovlennia avtobronetankovoi tekhniky Natsionalnoi hvardii Ukrainy [Assessment of the efficiency of the armored vehicle recovery system of the National Guard of Ukraine]. Honor and Law, 3(86), 110–115. https://doi.org/10.33405/2078-7480/2023/3/86/287127
Pavlov, Ya. V. (2024). Alhorytmy dii remontnykh pidrozdiliv z vidnovlennia avtobronetankovoi tekhniky v umovakh vedennia boiovykh dii [Algorithms of repair unit actions for restoring armored vehicles under combat conditions]. Collection of Scientific Works of the National Academy of the National Guard of Ukraine, 2(44), 115–121. https://doi.org/10.33405/2409-7470/2024/2/44/319518
Rautio, S., Vehviläinen, J., & Lehtonen, J.-M. (2026). Simulation analysis of additive manufacturing support for military maintenance during operations. The Journal of Defense Modeling and Simulation. Advance online publication. https://doi.org/10.1177/15485129261473305
U.S. Department of Defense. (2024). Regional Sustainment Framework. https://www.acq.osd.mil/asds/docs/RSF-9MAY24.pdf
UK Ministry of Defence. (2022). Support Advantage Charter. https://www.gov.uk/government/publications/defence-support-strategy/support-advantage-charter
UkrNDNC. (2022a). DSTU V 15.201:2022. Systema keruvannia zhyttievym tsyklom ozbroiennia ta viiskovoi tekhniky. Taktyko-tekhnichne (tekhnichne) zavdannia na vykonannia doslidno-konstruktorskoi roboty. Zahalni vymohy [Life-cycle management system of armament and military equipment. Tactical and technical specification for R&D. General requirements]. Kyiv: UkrNDNC. https://ukrmts.com/docsdb/30213.html
UkrNDNC. (2022b). DSTU V 15.004:2022. Systema keruvannia zhyttievym tsyklom ozbroiennia ta viiskovoi tekhniky. Stadii zhyttievoho tsyklu [Life-cycle stages of armament and military equipment]. Kyiv: UkrNDNC. https://budstandart.ua/normativ-document.html?id_doc=99700
UkrNDNC. (2023a). DSTU V 15.203:2023. Vykonannia doslidno-konstruktorskykh robit zi stvorennia vyrobiv ta yikh skladnykiv. Osnovni polozhennia [R&D for creation of products and components. Main provisions]. Kyiv: UkrNDNC. https://ukrmts.com/docsdb/50600.html
UkrNDNC. (2023b). DSTU V 15.007:2023. Otsiniuvannia vartosti zhyttievoho tsyklu ozbroiennia ta viiskovoi tekhniky. Osnovni polozhennia [Life-cycle cost assessment of armament and military equipment]. Kyiv: UkrNDNC. https://ukrmts.com/docsdb/30317.html
UkrNDNC. (2023c). DSTU V 15.210:2023. Vyprobuvannia ozbroiennia ta viiskovoi tekhniky. Osnovni polozhennia. Klasyfikatsiia [Testing of armament and military equipment. Main provisions. Classification]. Kyiv: UkrNDNC. https://csm.kiev.ua/nd/nd.php?b=1&l=19146
UkrNDNC. (2023d). DSTU V 15.206:2023. Prohrama zabezpechennia nadiinosti. Osnovni polozhennia [Reliability assurance programme. Main provisions]. Kyiv: UkrNDNC. https://ukrmts.com/docsdb/50690.html
UkrNDNC. (2023e). DSTU V 15.211:2023. Prohramy i metodyky vyprobuvan. Osnovni polozhennia [Test programmes and procedures. Main provisions]. Kyiv: UkrNDNC. https://ukrmts.com/docsdb/50606.html
Zijlstra, V., Basten, R., & Julsing, T. (2022). Printing in the Army: Where to locate additive manufacturing capabilities in a remote spare parts supply chain? IFAC-PapersOnLine, 55(10), 1165–1170. https://doi.org/10.1016/j.ifacol.2022.09.547
Żółtowski, B., & Żółtowski, M. (2024). Elements of logistics in the diagnostic strategy of military vehicle operation. Systemy Logistyczne Wojsk, 61(2), 171–192. https://doi.org/10.37055/slw/203432
Abstract views: 4 PDF Downloads: 1
Copyright (c) 2026 Богдан Череушенко

This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors agree with the following conditions:
1. Authors retain copyright and grant the journal right of first publication (Download agreement) with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors have the right to complete individual additional agreements for the non-exclusive spreading of the journal’s published version of the work (for example, to post work in the electronic repository of the institution or to publish it as part of a monograph), with the reference to the first publication of the work in this journal.
3. Journal’s politics allows and encourages the placement on the Internet (for example, in the repositories of institutions, personal websites, SSRN, ResearchGate, MPRA, SSOAR, etc.) manuscript of the work by the authors, before and during the process of viewing it by this journal, because it can lead to a productive research discussion and positively affect the efficiency and dynamics of citing the published work (see The Effect of Open Access).






