Methodological Framework for Comprehensive Technical Condition Assessment of Marine Diesel Engines Based on Parametric and Vibroacoustic Diagnostic Features
Abstract
Purpose. To develop a methodological framework for the comprehensive assessment of the technical condition of marine diesel engines with different functional purposes by integrating parametric and vibroacoustic diagnostic features into a single quantitative indicator to support maintenance and repair decisions.
Method. The study employs systems analysis, a review of scientific literature and technical documentation, normalization of diagnostic parameters, additive aggregation of partial indicators, statistical and spectral analysis, the pairwise comparison method, and regression modeling of degradation processes.
Findings. Six groups of diagnostic parameters were identified. A normalization procedure, an integral technical condition index (Ktc) with a preliminary four-level assessment scale, cyclic irregularity criteria (COV and CII), a vibration diagnostic criterion, and a model for predicting remaining useful life were developed. An eight-step algorithm for applying the methodology was proposed.
Theoretical implications. Existing approaches to comprehensive marine diesel engine diagnostics were systematized. The structure of a methodological framework combining direct and indirect monitoring methods and allowing diagnostic criteria to be adapted to engines with different functional purposes was substantiated.
Practical implications. The proposed framework provides a methodological basis for assessing the actual technical condition of engines, planning maintenance and repair activities, determining diagnostic inspection intervals, and predicting the remaining useful life of marine power plant engines.
Originality/value. The originality lies in the structural integration of established parametric, vibroacoustic, and statistical diagnostic methods into a unified methodological framework incorporating a non-compensatory rule for identifying critical conditions, independent cyclic irregularity criteria, and a degradation prediction model.
Limitations/future research. The absence of current operational measurements limits experimental validation of the results. Weighting coefficients and threshold values of the integral index require further justification and verification. Future research will focus on validating the methodology using Wärtsilä 8R22HF-D and Volvo Penta TAD121CHC engines.
Paper type. Theoretical and methodological.
Downloads
References
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006). A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mechanical Systems and Signal Processing, 20(7), 1483-1510. https://doi.org/10.1016/j.ymssp.2005.09.012
Karatuğ, Ç., & Arslanoğlu, Y. (2022). Development of condition-based maintenance strategy for fault diagnosis for ship engine systems. Ocean Engineering, 256, Article 111515. https://doi.org/10.1016/j.oceaneng.2022.111515
International Organization for Standardization. (2018). Condition monitoring and diagnostics of machines - General guidelines (ISO Standard No. 17359:2018).
Varbanets, R. A., Minchev, D. S., Kucherenko, Yu. M., & Zalozh, V. I. (2024). Parametrychna diahnostyka sudnovykh dyzelnykh dvyhuniv v rezhymi realnoho chasu [Real-time parametric diagnostics of marine diesel engines]. Internal Combustion Engines, (1), 69–75. https://doi.org/10.20998/0419-8719.2024.1.09
Varbanets, R., Minchev, D., Kucherenko, Y., Zalozh, V., Kyrylash, O., & Tarasenko, T. (2024). Methods of real-time parametric diagnostics for marine diesel engines. Polish Maritime Research, 31(3), 71-84. https://doi.org/10.2478/pomr-2024-0037
Chyshkala, P., Meshkov, D., & Bozhko, E. (2021). Vyznachennia potochnoho tekhnichnoho stanu dyzelnoho dvyhuna metodamy bezrozbirnoi diahnostyky za parametramy palyvnoi aparatury [Determination of the current technical condition of a diesel engine by non-disassembly diagnostic methods based on fuel equipment parameters]. Bulletin of the National Technical University “KhPI”. Series: Power and Heat Engineering Processes and Equipment, (2), 15-19. https://doi.org/10.20998/2078-774X.2021.02.03
Bilousov, Ye. V., Marchenko, A. P., Rybalchenko, M. Ye., Savchuk, V. P., & Tuluchenko, H. Ya. (2022). Rozrobka metodiv otsinky tekhnichnoho stanu dvyhuniv za rezultatamy indytsiiuvannia robochoho protsesu na rezhymakh vidminnykh vid nominalnykh [Development of methods for assessing the technical condition of engines based on the results of working process indication at off-nominal modes]. Internal Combustion Engines, (1), 51-59. https://doi.org/10.20998/0419-8719.2022.1.07
Ivashchenko, I. I., Pryimakov, O. H., & Shunailov, A. H. (2003). Rozrobka intehralnykh pokaznykiv diahnostuvannia tekhnichnoho stanu dyzelnykh dvyhuniv [Development of integral indicators for diagnosing the technical condition of diesel engines]. Internal Combustion Engines, (1-2), 57-61.
Lamaris, V. T., & Hountalas, D. T. (2010). A general purpose diagnostic technique for marine diesel engines – Application on the main propulsion and auxiliary diesel units of a marine vessel. Energy Conversion and Management, 51(4), 740–753. https://doi.org/10.1016/j.enconman.2009.10.031
Radić, J., Šarić, M., & Rubić, A. (2025). Spectral-based fault detection method in marine diesel engine operation. Sensors, 25(18), Article 5669. https://doi.org/10.3390/s25185669
Xie, Z., Mo, C., & Jia, B. (2025). Marine diesel engine reliable intelligent fault diagnosis method based on the generalized multi-source information fusion. iScience, 29(1), Article 114345. https://doi.org/10.1016/j.isci.2025.114345
Tsitsilonis, K.-M., Theotokatos, G., Patil, C., & Coraddu, A. (2023). Health assessment framework of marine engines enabled by digital twins. International Journal of Engine Research, 24, 3264-3281. https://doi.org/10.1177/14680874221146835
Saraieva, I. Yu., Khruliev, O. E., & Vorobiov, O. M. (2021). Ekspertna otsinka tekhnichnoho stanu tsylindro-porshnevoi hrupy dvyhuna avtomobilia [Expert assessment of the technical condition of the cylinder-piston group of a vehicle engine]. Visnyk mashynobuduvannia ta transportu, 13(1), 133-139. https://doi.org/10.31649/2413-4503-2021-13-1-133-139
Saraieva, I., Khruliev, O., & Vorobiov, O. (2022). Rozrobka matematychnykh kryteriiv otsinky yakosti diahnostuvannia tsylindro-porshnevoi hrupy dvyhuna avtomobilia [Development of mathematical criteria for assessing the quality of diagnosing the cylinder-piston group of a vehicle engine]. Avtomobil i elektronika. Suchasni tekhnolohii, (22), 92-103. https://doi.org/10.30977/VEIT.2022.22.0.10
Wärtsilä Corporation. (n.d.). Wärtsilä Vasa 22 engine operation manual: Main characteristics, operational specification and engine arrangement.
AB Volvo Penta. (1984). Workshop manual: Marine diesel engines TMD100C, TMD121C, TAMD121C; Industrial diesel engines TD100G, TID100K, TD121G, TD120HPP, TID120HPP, TID121FG (Publ. No. 5333).
USSR Register of Shipping, & Wärtsilä Diesel. (1986). Certificate No. 86.5184.260 for diesel engine 8R22HF-D, serial No. 3890; bench test description, measurement reports and setting values for diesel engines 8R22 Nos. 3889 and 3890 [Unpublished archival documents].
Saaty, T. L. (2008). Decision making with the analytic hierarchy process. International Journal of Services Sciences, 1(1), 83-98. https://doi.org/10.1504/IJSSCI.2008.017590
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018). Machinery health prognostics: A systematic review from data acquisition to RUL prediction. Mechanical Systems and Signal Processing, 104, 799-834. https://doi.org/10.1016/j.ymssp.2017.11.016
Copyright (c) 2026 Ігор Давидов, Костянтин Назаренко, Володимир Бенедюк

This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors agree with the following conditions:
1. Authors retain copyright and grant the journal right of first publication (Download agreement) with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors have the right to complete individual additional agreements for the non-exclusive spreading of the journal’s published version of the work (for example, to post work in the electronic repository of the institution or to publish it as part of a monograph), with the reference to the first publication of the work in this journal.
3. Journal’s politics allows and encourages the placement on the Internet (for example, in the repositories of institutions, personal websites, SSRN, ResearchGate, MPRA, SSOAR, etc.) manuscript of the work by the authors, before and during the process of viewing it by this journal, because it can lead to a productive research discussion and positively affect the efficiency and dynamics of citing the published work (see The Effect of Open Access).






