Method of Assessing the Effectiveness of Using Unmanned Ground Systems for Logistics Tasks
Abstract
Purpose. To substantiate a methodology for evaluating the effectiveness of unmanned ground systems based on test results obtained during logistics support and medical evacuation missions in combat operations.
Method. Systems analysis, expert assessment, mathematical modeling, and statistical analysis of test results.
Findings. A methodology for evaluating the effectiveness of unmanned ground systems was developed, incorporating mission-specific performance indicators for logistics support and medical evacuation. A structured testing procedure was proposed, including test planning, preparation of the test site and measuring equipment, recording of environmental conditions, test execution, and statistical processing of the obtained data. The use of mathematical modeling was substantiated as a means of expanding the statistical dataset, provided that simulation results are consistent with empirical test data. The proposed methodology enables the assessment of logistics and evacuation mission performance, may help reduce uncertainty in decision-making concerning adoption into service and rationalize testing procedures; these expected effects require experimental validation.
Theoretical implications. The scientific and methodological approach to evaluating the effectiveness of unmanned ground systems was improved by integrating experimental testing, mathematical modeling, and statistical analysis.
Practical implications. The developed methodology can be applied to refine operational and tactical requirements, compare advanced unmanned ground systems, and substantiate decisions regarding their selection, testing, and adoption into service by the Defence Forces of Ukraine.
Paper type. Methodological research article.
Downloads
References
DSTU V 15.211:2023. (2023). Systema keruvannia zhyttievym tsyklom ozbroiennia ta viiskovoi tekhniky. Prohramy i metodyky vyprobuvan. Osnovni polozhennia [Life cycle management system for armaments and military equipment. Test programs and methods. General provisions]. DP “UkrNDNTs”. https://online.budstandart.com/ua/catalog/doc-page.html?id_doc=102731
Lappo, I. M., Chervotoka, O. V., & Herashchenko, M. O. (2021). Analiz standartiv NATO shchodo vidpovidnosti zrazkiv ozbroiennia ta viiskovoi tekhniky do vplyvu klimatychnykh faktoriv [Analysis of NATO standards concerning the compliance of armaments and military equipment with climatic factors]. Zbirnyk naukovykh prats DNDI VS OVT, 1(7), 49–60. https://doi.org/10.37701/dndivsovt.7.2021.06
Cabinet of Ministers of Ukraine. (2017, October 18). Pro utvorennia Derzhavnoho naukovo-doslidnoho instytutu vyprobuvan i sertyfikatsii ozbroiennia ta viiskovoi tekhniky [On the establishment of the State Scientific Research Institute of Armament and Military Equipment Testing and Certification] (Resolution No. 786). https://zakon.rada.gov.ua/laws/show/786-2017-%D0%BF
Derzhavnyi naukovo-doslidnyi instytut vyprobuvan i sertyfikatsii ozbroiennia ta viiskovoi tekhniky. (2020). Metodyky vyznachalnykh vidomchykh vyprobuvan nazemnoho robotyzovanoho kompleksu – nazemnoi robotyzovanoi platformy RSVK-M3 vyrobnytstva TOV KB “ROBOTYKS” [Methods for departmental qualification testing of the RSVK-M3 ground robotic platform manufactured by ROBOTICS Design Bureau].
Dachkovskyi, V. O., & Kalamurza, O. H. (2025). Analiz rozvytku nazemnykh robotyzovanykh kompleksiv [Analysis of the development of ground robotic systems]. Social Development and Security, 15(3), 223–236. https://doi.org/10.33445/sds.2025.15.3.20
Hudyma, V. P., Kurtseitov, T. L., Nikitin, A. A., & Yaroshenko, O. V. (2026). Spetsyfichni pokaznyky efektyvnosti nazemnykh robotyzovanykh kompleksiv v umovakh lohistychnoho i medychnoho zabezpechennia operatsii (boiovykh dii) [Specific performance indicators of ground robotic systems in logistics and medical support of military operations]. Social Development and Security, 16(3), 448–460. https://doi.org/10.33445/sds.2026.16.3.28
Dachkovskyi, V. O. (2019). Metodyka obgruntuvannia taktyko-tekhnichnykh vymoh do rukhomykh zasobiv remontu ozbroiennia ta viiskovoi tekhniky [Methodology for substantiating tactical and technical requirements for mobile armament and military equipment repair facilities]. Social Development and Security, 9(6), 86–101. https://doi.org/10.33445/sds.2019.9.6.7
Kotsiuruba, V. I., & Dachkovskyi, V. O. (2022). Metodyka obgruntuvannia taktyko-tekhnichnykh vymoh do zasobiv tekhnichnoi rozvidky [Methodology for substantiating tactical and technical requirements for technical reconnaissance equipment]. Zbirnyk naukovykh prats Viiskovoi akademii (m. Odesa), 1(17), 37–47. https://doi.org/10.37129/2313-7509.2022.17.37-47
ASTM International. (n.d.). F45 on robotics, automation and autonomous systems. https://www.astm.org
ASTM International. (2017). Standard test method for navigation: Defined area (ASTM F3244-17). https://doi.org/10.1520/F3244-17
ASTM International. (2023). Standard test method for grid-video obstacle measurement (ASTM F3265-17(2023)). https://doi.org/10.1520/F3265-17R23
VST 01.055.006–2021 (01). (2021). Ozbroiennia ta viiskova tekhnika. Vyprobuvannia. Umovy navkolyshnoho seredovyshcha [Armaments and military equipment. Testing. Environmental conditions] (STANAG 4370 Edition 7/AECTP-200 Edition 4, IDT).
VST 01.055.007–2021 (01). (2021). Ozbroiennia ta viiskova tekhnika. Vyprobuvannia. Klimatychni umovy [Armaments and military equipment. Testing. Climatic conditions] (STANAG 4370 Edition 7/AECTP-230 Edition 1, IDT).
VST 01.055.008–2021 (01). (2021). Ozbroiennia ta viiskova tekhnika. Vyprobuvannia. Mekhanichni umovy [Armaments and military equipment. Testing. Mechanical conditions] (STANAG 4370 Edition 7/AECTP-240 Edition 1, IDT).
VST 01.055.010–2021 (01). (2021). Ozbroiennia ta viiskova tekhnika. Vyprobuvannia. Metody ta poriadok provedennia klimatychnykh vyprobuvan [Armaments and military equipment. Testing. Methods and procedures for climatic environmental testing] (STANAG 4370 Edition 7/AECTP-300 Edition D, IDT).
VST 01.055.011–2021 (01). (2021). Ozbroiennia ta viiskova tekhnika. Vyprobuvannia. Metody ta poriadok provedennia mekhanichnykh vyprobuvan [Armaments and military equipment. Testing. Methods and procedures for mechanical environmental testing] (STANAG 4370 Edition 7/AECTP-400 Edition D, IDT).
Lappo, I. M., Prykhodko, S. M., & Martyniuk, S. S. (2021). Analiz polozhen natsionalnykh standartiv shchodo vyprobuvan OVT na vplyv mekhanichnykh faktoriv [Analysis of national standards concerning the testing of armaments and military equipment under mechanical factors]. Zbirnyk naukovykh prats DNDI VS OVT, 3(9), 79–87. https://doi.org/10.37701/dndivsovt.9.2021.11
DSTU EN ISO 3691-4:2024. (2024). Promyslovyi vantazhnyi transport. Vymohy bezpeky ta pereviriannia. Chastyna 4. Samokhidnyi transport ta yoho systemy [Industrial trucks. Safety requirements and verification. Part 4: Driverless industrial trucks and their systems] (EN ISO 3691-4:2023, IDT; ISO 3691-4:2023, IDT). https://online.budstandart.com
Mazzare, M. (2011). UGV interoperability profile (IOP) capabilities plan for version 0. https://doi.org/10.21236/ADA554246
NATO Standardization Office. (2018). NATO generic vehicle architecture (NGVA) for land systems: Vol. VI. Safety (AEP-4754). https://nso.nato.int/nso
Tsentr matematychnoho modeliuvannia Instytutu prykladnykh problem mekhaniky i matematyky im. Ya. S. Pidstryhacha NAN Ukrainy. (2010). Fizyko-matematychne modeliuvannia ta informatsiini tekhnolohii [Physico-mathematical modelling and information technologies] (Issue 12).
Venttsel, O. S., & Ovcharov, L. A. (2007). Teoriia vypadkovykh protsesiv i yii inzhenerni dodatky [Theory of random processes and its engineering applications] (4th ed.). Vyshcha shkola.
Abstract views: 4 PDF Downloads: 1
Copyright (c) 2026 Олександр Шкварський, Анатолій Островський, Сергій Копашинський, Олександр Ярошенко

This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors agree with the following conditions:
1. Authors retain copyright and grant the journal right of first publication (Download agreement) with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors have the right to complete individual additional agreements for the non-exclusive spreading of the journal’s published version of the work (for example, to post work in the electronic repository of the institution or to publish it as part of a monograph), with the reference to the first publication of the work in this journal.
3. Journal’s politics allows and encourages the placement on the Internet (for example, in the repositories of institutions, personal websites, SSRN, ResearchGate, MPRA, SSOAR, etc.) manuscript of the work by the authors, before and during the process of viewing it by this journal, because it can lead to a productive research discussion and positively affect the efficiency and dynamics of citing the published work (see The Effect of Open Access).






