Indicators of a Vehicle's Rollover Resistance on a Side-Sloping Surface while Firing from Weapons, Taking into Account Deformation of the Suspension and Tires
Abstract
Purpose. To improve vehicle rollover stability indicators on a laterally sloped surface during weapon firing by accounting for lateral and radial tire deformation.
Method. Theoretical mechanics, mathematical modeling, experimental investigation, and comparative analysis of calculated and empirical data were employed. Nonlinear functional relationships were used to describe changes in lateral tire stiffness.
Findings. Mathematical relationships for determining the rollover stability safety factor and relative vehicle stability coefficient were improved by incorporating center-of-mass displacement caused by tire deformation. Using the Varta armored vehicle as an example, the study established that decreasing tire inflation pressure increases discrepancies between experimental and calculated values of lateral center-of-mass displacement. Neglecting tire deformation was found to overestimate the limiting lateral slope angle by 1.3°, or approximately 4%.
Theoretical implications. The study extends the mathematical framework for assessing vehicle lateral stability by incorporating additional deformation characteristics of running gear components.
Practical implications. The findings can support the assessment of operating conditions for armored vehicles and the evaluation of how mounted weapons affect their lateral stability.
Limitations. The results were obtained for a specific armored vehicle configuration under defined tire and weapon characteristics.
Paper type. Research article.
Downloads
References
Kaidalov, R. O., Bilenko, O. I., & Kudimov, S. A. (2022). Pokaznyky ta kryterii boiovoi zhyvuchosti bronovanykh kolisnykh mashyn [Indicators and criteria of combat survivability of armored wheeled vehicles]. Zbirnyk naukovykh prats Natsionalnoi akademii Natsionalnoi hvardii Ukrainy, 2(40), 35–42. https://doi.org/10.33405/2409-7470/2022/2/40/270529
Kaidalov, R. O., Bilenko, O. I., & Kudimov, S. A. (2023). Metodyka zabezpechennia zadanoho rivnia boiovoi zhyvuchosti bronovanykh kolisnykh mashyn [Methodology for ensuring a specified level of combat survivability of armored wheeled vehicles]. Zbirnyk naukovykh prats Natsionalnoi akademii Natsionalnoi hvardii Ukrainy, 1(41), 65–72. https://doi.org/10.33405/2409-7470/2023/1/41/280883
Bilenko, O., & Shabatura, S. (2024). The condition of the vehicle's stability to overturning on a surface with a lateral slope when firing from the weapon. Chest i Zakon, 4(91), 22–27. https://doi.org/10.33405/2078-7480/2024/4/91/324061
Aparow, V. R., Hudha, K., Megat Ahmad, M. H., & Abdullah, S. (2016). Study on the dynamic performance of armored vehicle in lateral direction due to firing impact. Advances in Military Technology, 11(1), 3–18.
Gillespie, T. D. (1992). Fundamentals of vehicle dynamics. SAE International.
Wong, J. Y. (2008). Theory of ground vehicles (4th ed.). John Wiley & Sons.
Pacejka, H. B. (2012). Tire and vehicle dynamics (3rd ed.). Butterworth-Heinemann.
Abe, M. (2015). Vehicle handling dynamics: Theory and application (2nd ed.). Butterworth-Heinemann.
Clark, S. K. (Ed.). (1981). Mechanics of pneumatic tires. National Bureau of Standards.
Heißing, B., & Ersoy, M. (Eds.). (2011). Chassis handbook: Fundamentals, driving dynamics, components, mechatronics, perspectives. Vieweg+Teubner Verlag.
Bilenko, O., & Shabatura, S. (2026). Condition for vehicle rollover stability on a lateral slope during firing with account of suspension and tire deformation. Social Development and Security, 16(2), 246–255. https://doi.org/10.33445/sds.2026.16.2.21
Song, X. (2013). Development of a refined rollover model that recognizes the effects of suspension and tire deformation. Mathematical Problems in Engineering, 2013, Article 750896. https://doi.org/10.1155/2013/750896
Guo, K., Chen, P., Xu, N., Yang, C., & Li, F. (2019). Tire side force characteristics with the coupling effect of vertical load and inflation pressure. SAE International Journal of Vehicle Dynamics, Stability, and NVH, 3(1), 19–30. https://doi.org/10.4271/10-03-01-0002
Matsubara, M., Tajiri, D., Horiuchi, M., & Kawamura, S. (2015). Evaluation of spring properties of tire sidewall under changes in inflation pressure. SAE International Journal of Passenger Cars – Mechanical Systems. https://doi.org/10.4271/2015-01-2193
Abstract views: 4 PDF Downloads: 1
Copyright (c) 2026 Олександр Біленко, Сергій Шабатура

This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors agree with the following conditions:
1. Authors retain copyright and grant the journal right of first publication (Download agreement) with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors have the right to complete individual additional agreements for the non-exclusive spreading of the journal’s published version of the work (for example, to post work in the electronic repository of the institution or to publish it as part of a monograph), with the reference to the first publication of the work in this journal.
3. Journal’s politics allows and encourages the placement on the Internet (for example, in the repositories of institutions, personal websites, SSRN, ResearchGate, MPRA, SSOAR, etc.) manuscript of the work by the authors, before and during the process of viewing it by this journal, because it can lead to a productive research discussion and positively affect the efficiency and dynamics of citing the published work (see The Effect of Open Access).






