Assessment of the Technical Component of Poisoning Risk among Workers at Chemical Processing Units of Industrial Enterprises Using FTA
Abstract
Purpose. To develop a model for assessing the probability of failure of a personnel protection system in a chemical processing facility using Fault Tree Analysis (FTA) as a technical component of assessing the risk of worker poisoning, and to identify priority areas for improving occupational safety.
Method. Fault Tree Analysis was used to identify critical system components and determine logical relationships between failures; probability theory methods were applied to calculate the probability of occurrence of the top event; computer modeling and numerical calculations in Mathcad were employed to implement the mathematical model.
Findings. The proposed model establishes structural and logical relationships between failures of individual technical safety devices and the probability of failure of the protection system as a whole. Directions for further research were also identified, including the development of medical scenarios and the determination of probabilistic indicators required for a comprehensive assessment of individual technological risk.
Theoretical implications. The advancement of scientific and methodological foundations for risk-based assessment of safety systems at potentially hazardous chemical production facilities through the substantiation of a structural and logical model for determining the probability of protection system failure using Fault Tree Analysis.
Practical implications. he application of the proposed model for quantitatively assessing the probability of protection system failure at potentially hazardous chemical production facilities, identifying its critical components, and substantiating priority measures to improve the reliability of technical safety equipment.
Research limitations / future research. The study is limited to assessing the probability of protection system failure as a technical component of comprehensive technological risk assessment and does not include modeling the medical consequences of accidents.
Originality / value of the study. The study demonstrates the practical applicability of Fault Tree Analysis for quantitatively assessing the probability of protection system failure at potentially hazardous chemical production facilities as a technical component of assessing the risk of worker poisoning.
Paper type. Research article.
Downloads
References
State Enterprise “Ukrainian Scientific Research and Training Center for Standardization, Certification and Quality.” (2018). Risk management: Guidelines (DSTU ISO 31000:2018) [National standard of Ukraine; identical to ISO 31000:2018].
State Enterprise “Ukrainian Scientific Research and Training Center for Standardization, Certification and Quality.” (2014). Occupational safety and health: Terms and definitions of basic concepts (DSTU 2293:2014) [National standard of Ukraine].
Tsopa, V., Cheberyachko, S., Sharovatova, O., Deryugin, O., & Lapko, K. (2025). Concepts of occupational safety, workplace safety, and employee health and well-being at work [Original article in Ukrainian]. Social Development and Security, 15(4), 116–125. https://doi.org/10.33445/sds.2025.15.4.11
Klyuchka, Y. (2025). Correlation between the hazard class of a high-risk facility, the mass of hazardous substances, and its risk [Original article in Ukrainian]. Social Development and Security, 15(3), 149–162. https://doi.org/10.33445/sds.2025.15.3.15
Petryshchev, A., Semyriahyn, S., Smirnov, O., Smirnov, Y., & Tsymbal, B. (2023). Prevention of occupational risks associated with the harmful effects of sulfur dioxide on workers’ health and improvement of environmental safety during industrial gas purification [Original article in Ukrainian]. Social Development and Security, 13(2), 161–170. https://doi.org/10.33445/sds.2023.13.2.14
Kokolenko, A. O., & Turyk, V. M. (2025). Filtration equipment for aspiration, ventilation, and pneumatic transport systems in industry: Operational features, aerodynamic problems, and solutions [Original article in Ukrainian]. Mechanics and Advanced Technologies, 9(2(105)), 144–156. https://doi.org/10.20535/2521-1943.2025.9.2(105).327118
Chemykos, S. (2026). Features of selecting respiratory protective equipment when working with pesticides [Original article in Ukrainian]. Labour Protection Problems in Ukraine, 42(1), 100–106. https://doi.org/10.36804/nndipbop.42-1.2026.100-106
Hunter, G. W., Akbar, S., Bhansali, S., Daniele, M., Erb, P. D., Johnson, K., Liu, C.-C., Miller, D., Oralkan, O., Hesketh, P. J., Manickam, P., & Vander Wal, R. L. (2020). Editors' Choice—Critical review—A critical review of solid state gas sensors. Journal of The Electrochemical Society, 167(3), Article 037570. https://doi.org/10.1149/1945-7111/ab729c
Ding, Y., Meng, F., An, F., Zhu, L., Wang, L., & Wu, E. (2026). Semiconductor-based combustible gas sensors for the petrochemical industry: A review. Nanoscale, 18(24), 12742–12774. https://doi.org/10.1039/D6NR00751A
Ou, L. X., Liu, M. Y., Zhu, L. Y., Zhang, D. W., & Lu, H. L. (2022). Recent progress on flexible room-temperature gas sensors based on metal oxide semiconductor. Nano-Micro Letters, 14(1), Article 4. https://doi.org/10.1007/s40820-022-00956-9
Bulemo, P. M., Kim, D. H., Shin, H., Cho, H. J., Koo, W. T., Choi, S. J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., & Kim, I. D. (2025). Selectivity in chemiresistive gas sensors: Strategies and challenges. Chemical Reviews, 125(8), 4111–4183. https://doi.org/10.1021/acs.chemrev.4c00592
Chew, B.-K., Mahmud, A., & Singh, H. (2025). Autonomous hazardous gas detection systems: A systematic review. Sensors, 25(21), Article 6618. https://doi.org/10.3390/s25216618
Kim, Y., Lim, C., Lee, J., Kim, S., Kim, S., & Seo, D.-H. (2023). Chemistry-informed machine learning: Using chemical property features to improve gas classification performance. Chemometrics and Intelligent Laboratory Systems, 237, Article 104808. https://doi.org/10.1016/j.chemolab.2023.104808
Zhao, X., & Yin, Y. (2024). Hazards of pollutants and ventilation control strategy in industrial workshops: Current state and future trend. Building and Environment, 251, Article 111229. https://doi.org/10.1016/j.buildenv.2024.111229
Cao, Z., He, J., Bai, Y., Wang, Y., Xiao, Z., Zhou, Y., & Cao, Y. (2024). A dynamic ventilation strategy for industrial buildings based on weight factors. Building and Environment, 258, Article 111578. https://doi.org/10.1016/j.buildenv.2024.111578
Wang, Y., Zheng, C., & Wang, L. (2026). Causal factors and configuration paths for chemical occupational accidents: Grounded theory and fsQCA analysis of 154 cases in China. Frontiers in Public Health, 13, Article 1713532. https://doi.org/10.3389/fpubh.2025.1713532
Song, Y., Chen, X., Zhang, Z., Cao, S., Du, T., & Guo, H. (2022). Research on a push-pull industrial trough-side exhaust hood based on CFD simulation and experiment. Science of the Total Environment, 827, Article 154265. https://doi.org/10.1016/j.scitotenv.2022.154265
Burda, Y. (2026). Redukovane modeliuvannia formuvannia mikroklimatu v systemakh vytysknoi ventyliatsii [Reduced-order modeling of microclimate formation in displacement ventilation systems]. Ventyliatsiia, Osvitlennia ta Teplohazopostachannia, 57, 23–39. https://doi.org/10.32347/2409-2606.2026.57.23-39
Xu, Y., Cao, C., Ma, M., Jiao, Z., Cheng, L., Xie, W., Gao, J., & Zeng, L. (2022). Direction air supply design and optimization in industrial settings to reduce gaseous contaminant exposure. Building and Environment, 216, Article 109003. https://doi.org/10.1016/j.buildenv.2022.109003
Kiosak, V., Isaiev, V., Fedorenko, V., Hridasov, A., & Bankivskyi, M. (2024). Modeliuvannia povitroobminu “podacha povitria zverkhu – vydalennia zverkhu” [Modeling air exchange with overhead air supply and overhead exhaust]. Ventyliatsiia, Osvitlennia ta Teplohazopostachannia, 50, 64–88. https://doi.org/10.32347/2409-2606.2024.50.64-88
Kabbara, Z., Jorens, S., Seuntjens, O., & Verhaert, I. (2024). Simulation-based optimization method for retrofitting HVAC ductwork design. Energy and Buildings, 307, Article 113991. https://doi.org/10.1016/j.enbuild.2024.113991
Bin Ab Rahim, M. S., Reniers, G., Yang, M., & Bajpai, S. (2024). Risk assessment methods for process safety, process security and resilience in the chemical process industry: A thorough literature review. Journal of Loss Prevention in the Process Industries, 88, Article 105274. https://doi.org/10.1016/j.jlp.2024.105274
Taherzadeh Chenani, K., Zarei, E., Yazdi, M., Klockner, K., Alimohammadlou, M., & Kamalinia, M. (2024). A systematic review of the integration between occupational and process safety risk analysis methodologies. Journal of Loss Prevention in the Process Industries, 91, Article 105387. https://doi.org/10.1016/j.jlp.2024.105387
Ahammed, E., Soman, A. R., Gopakumar, B., Pramod, V. R., & Madhu, G. (2022). Covariate model-based fault tree analysis for risk assessment in chemical process industries: A case study of a chlorine manufacturing facility. Journal of the Indian Chemical Society, 99(6), Article 100463. https://doi.org/10.1016/j.jics.2022.100463
Usahanunth, N., Imman, S., & Suwannahong, K. (2022). Dust explosion risk assessment of extruded food production process by fault tree analysis. ACS Chemical Health & Safety, 29(1), 91–97. https://doi.org/10.1021/acs.chas.1c00036
Soltanzadeh, A., Zarei, E., Mahdinia, M., & Sadeghi-Yarandi, M. (2024). An integrated approach to assess safety and security risks in chemical process industries. Journal of Loss Prevention in the Process Industries, 90, Article 105344. https://doi.org/10.1016/j.jlp.2024.105344
Wu, J., Ren, J., Ravn, O., & Nalpantidis, L. (2025). A risk-informed design framework for functional safety system design of human–robot collaboration applications. Safety, 11(1), Article 24. https://doi.org/10.3390/safety11010024
Zhao, Y., Liu, H., Tong, B., He, C., & Zhu, J. (2025). Integrated fault tree analysis and Bayesian network for fire risk assessment in university laboratories. ACS Chemical Health & Safety, 32(6), 780–790. https://doi.org/10.1021/acs.chas.5c00134
Maharani, C., Amri, & Sayuti, M. (2025). Analysis of occupational health and safety hazard risk using hazard and operability and fault tree analysis methods. International Journal of Engineering, Science and Information Technology, 5(1), 117–127. https://doi.org/10.52088/ijesty.v5i1.676
State Enterprise “Ukrainian Scientific Research and Training Center for Standardization, Certification and Quality.” (2022). Risk management: Risk assessment techniques (DSTU EN IEC 31010:2022) [National standard of Ukraine; identical to EN IEC 31010:2019 and IEC 31010:2019].
Ministry of Health of Ukraine. (2024, July 9). Pro zatverdzhennia derzhavnykh medyko-sanitarnykh normatyviv dopustymoho vmistu khimichnykh i biolohichnykh rechovyn u povitri robochoi zony [On approval of state medical and sanitary standards for permissible concentrations of chemical and biological substances in workplace air] (Order No. 1192). https://zakon.rada.gov.ua/laws/show/z1107-24
Ottermo, M. V., Hauge, S., & Håbrekke, S. (2021). Reliability data for safety equipment: PDS data handbook – 2021 edition. SINTEF Digital. https://www.sintef.no/en/publications/publication/0198cc96b219-a6550074-ccb4-478f-b7a2-f7386cca694d/
Abstract views: 4 PDF Downloads: 1
Copyright (c) 2026 Олександр Мамонтов, Інна Хондак, Ірина Сезонова, Владислав Євсєєв, Світлана Сотник

This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors agree with the following conditions:
1. Authors retain copyright and grant the journal right of first publication (Download agreement) with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors have the right to complete individual additional agreements for the non-exclusive spreading of the journal’s published version of the work (for example, to post work in the electronic repository of the institution or to publish it as part of a monograph), with the reference to the first publication of the work in this journal.
3. Journal’s politics allows and encourages the placement on the Internet (for example, in the repositories of institutions, personal websites, SSRN, ResearchGate, MPRA, SSOAR, etc.) manuscript of the work by the authors, before and during the process of viewing it by this journal, because it can lead to a productive research discussion and positively affect the efficiency and dynamics of citing the published work (see The Effect of Open Access).






