Analysis of factors influencing the metrological support system of military units in the Armed Forces of Ukraine based on the experience of the Russo-Ukrainian war
Abstract
Purpose: The identification and analysis of factors influencing the metrological support system of military units in the Armed Forces of Ukraine, the improvement or mitigation of which would enhance the system's effectiveness under modern conditions, based on the experience of the Russo-Ukrainian war.
Method: Methods of comprehensive analysis and synthesis, system analysis, comparative method, and expert evaluation method.
Research results: Key directions for improving the metrological support system of military units in the Armed Forces of Ukraine have been identified: integration into the automated control system, development and implementation of new approaches to employing the system's forces and resources in response to modern challenges, and initiation of organizational measures for metrological units.
Theoretical value of the study: The theoretical principles, conclusions, and recommendations outlined in this work can serve as a basis for further scientific research and discussions on enhancing the metrological support system of military units in the Armed Forces of Ukraine.
Practical value of the study: The implementation of the recommendations and proposals substantiated in this work, aimed at enhancing the metrological support system of military units in the Armed Forces of Ukraine, which impacts all aspects of the troops (forces) operations, will ensure continuous combat readiness and high effectiveness in the combat employment of military units of the Armed Forces of Ukraine.
Originality of the study: This study analyzes specific factors affecting the functioning of the entire hierarchy of command and control bodies and the implementation of metrological support measures, which have not previously been the subject of comprehensive scientific research.
Downloads
References
On Metrology and Metrological Activity: Law of Ukraine (as amended) No. 1314-VII dated 05.06.2014. Available from : https://zakon.rada.gov.ua/laws/show/1314-18#Text.
On Approval of the Regulation on the Metrological Service of the Ministry of Defense of Ukraine and the Armed Forces of Ukraine: Order of the Ministry of Defense of Ukraine No. 288 dated 24.05.2017. Available from : https://zakon.rada.gov.ua/rada/show/v0288322-17#Text.
On Approval of the Guide on the Organization and Procedure for the Operation of Measuring Instruments in the Armed Forces of Ukraine: Order of the Deputy Minister of Defense for Armaments – Head of Armaments of the Armed Forces of Ukraine No. 79 dated 01.06.2001.
Guidelines “Metrological Military Units and Subdivisions”. Kyiv: Logistics Forces Command, 2020. – 82 p. VKDP 4-84 (03).01.
On Approval of the Guide on the Organization of Production Activities of Military Metrological Laboratories in the Ministry of Defense of Ukraine and the Armed Forces of Ukraine: Order of the Head of the Central Administration for Metrology and Standardization No. 2 dated 14.05.2007.
Kuznetsov I. B., Matsko O. Y., Hudyma V. P., Yaroshenko O. V. Organization of Metrological Support of Troops (Forces). Part 1: [Textbook]. Kyiv: NDUU, 2020. – 356 p.7.
Pavlovskyi O., Sova O., Koval V. Ways to Improve the Metrological Support System in the Modern Development of the Armed Forces of Ukraine. Kyiv: CNDI AFU, 2021. https://doi.org/10.33445/sds.2021.11.4.15.
Kuznetsov I. B., Hudyma V. P., Khomik M. M. Evaluation of the Efficiency of the Metrological Support System of the Armed Forces of Ukraine. // Collected Scientific Works of NDUU “University Proceedings”. – 2016. – No. 5(138). – P. 148-151.
Kuznetsov I. B., Hudyma V. P., Dyadechko A. O. Analysis of Principles and Organizational Foundations for Controlling the Parameters of Weapons and Military Equipment Samples of the Air Forces During Metrological Maintenance. // Collected Scientific Works of the National Defense University of Ukraine “University Proceedings”. – Kyiv: NDUU, 2019. – Issue 1(151). – P. 119-128.
Voinov V. V., Brovko M. B., Zapara D. M. Automated Control of the Technical Condition of a Sample of Weapons and Military Equipment as a Condition for Integration into the CALS Environment. // Science and Technology of the Air Forces of the Armed Forces of Ukraine. – Kharkiv: KhAFU named after I. Kozhedub, 2015, No. 1(18).
Burtseva V. V. Improvement of the Method for Forecasting the Volume of Orders for Metrological Support of Weapons and Military Equipment Samples. // Information Processing Systems, 2020, Issue 4(163). – Kharkiv: Military Unit A0785, 2020. https://doi.org/10.30748/soi.2020.163.01.
Naumenko A. M., Babych O. O., Korotkyi E. O. Analysis of Methods for Organizing Metrological Support for Information and Measurement Control Systems. // Control, Navigation, and Communication Systems, 2019, Issue 5(57). – Kharkiv: KhAFU named after I. Kozhedub, 2020. https://doi.org/10.26906/SUNZ.2019.5.02.
Abstract views: 83 PDF Downloads: 28
Copyright (c) 2025 Viktor Hudyma, Viacheslav Chervoniak
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors agree with the following conditions:
1. Authors retain copyright and grant the journal right of first publication (Download agreement) with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors have the right to complete individual additional agreements for the non-exclusive spreading of the journal’s published version of the work (for example, to post work in the electronic repository of the institution or to publish it as part of a monograph), with the reference to the first publication of the work in this journal.
3. Journal’s politics allows and encourages the placement on the Internet (for example, in the repositories of institutions, personal websites, SSRN, ResearchGate, MPRA, SSOAR, etc.) manuscript of the work by the authors, before and during the process of viewing it by this journal, because it can lead to a productive research discussion and positively affect the efficiency and dynamics of citing the published work (see The Effect of Open Access).
