Ways to improve the metrological support system in the modern conditions of the Ukraine Armed Forces development
Abstract
The metrological support system of the Ukraine Armed Forces is designed to measure and control the parameters of weapons and military equipment samples. Metrological support in the Ukraine Armed Forces of is organized and carried out by the metrology and standardization services of military units, operational (air) commands, General Staff of the Ukraine Armed Forces, and its improvement is an important scientific and technical task, the relevance of which is confirmed in combat readiness.
The article analyzes the metrological support system of the Ukraine Armed Forces and suggests ways to improve it, taking into account the gradual transition of the Ukraine Armed Forces to NATO standards, armaments and military equipment development, increasing measurement parameters and rapid development of information technology.
The high-precision armaments and military equipment development, their control systems, the introduction of a logistics system requires us to improve the metrological system of the Ukraine Armed Forces for its integration into a single control system for troops (forces), which will quickly and effectively address metrological weapons and military equipment, timely staffing with measuring equipment for military purposes, and adequate control over the state of the Ukraine Armed Forces metrological support.
Downloads
References
On Metrology and Metrological Activity: Law of Ukraine (as amended) (dated 05.06.2014 № 1314-VII).
On the peculiarities of ensuring the unity of measurements in the field of defense of Ukraine: Resolution of the Cabinet of Ministers of Ukraine dated 23.12.2015 № 1152.
Regulations on the metrological service of the Ministry of Defense of Ukraine and the Armed Forces of Ukraine: approved. Order of the Ministry of Defense of Ukraine dated 24.05.2017 № 288.
Guide on the organization and operation of measuring equipment in the Armed Forces of Ukraine: approved. By order of the Deputy Minister of Defense for Armaments – Chief of the Armaments of the Armed Forces of Ukraine dated 01.06.2001 № 79.
Temporary instruction on authorization of military metrological laboratories: approved by the Order of the Head of the Central Department of Metrology and Standardization of the Armed Forces of Ukraine Armament of the Armed Forces of Ukraine – Chief Metrologist of the Armed Forces of Ukraine dated 08.10.2018 № 7.
Instruction on the organization of metrological maintenance of special control and testing equipment: approved by the Order of the Ministry of Defense of Ukraine dated 19.12.2014 № 907.
The list of military measuring equipment subject to verification (certification) in the Armed Forces of Ukraine: approved by the Order of the Minister of Defense of Ukraine dated 26.11.1994 № 278.
On the transformation of the system of joint leadership of the defense forces and military management in the Armed Forces of Ukraine: Order of the Ministry of Defense of Ukraine dated March 29, 2019 № 141.
Kuznetsov I. B., Gudyma V. P., Khomik M. M. (2016). Estimation of efficiency of functioning of metrological maintenance system of Ukraine Armed forces. Collection of scientific works of NUOU “Proceedings of university”. №5 (138). P. 148-151.
Kuznetsov I. B., Gudyma V. P., Diadechko A. O. (2019). Analysis of principles and organizational bases of parameters control of armament and military equipment samples of air forces during carrying out metrological service. Collection of scientific works of the National Defense University of Ukraine “Proceedings of the University”. Vol. 1 (151), P. 119-128.
Voinov V. V., Brovko M. B., Zapara D. M. (2015). Automated control of the technical condition of the weapons sample, as one of the conditions of integration into the environment CALS. Science and Technology of the Air Force of the Ukraine Armed Forces. № 1 (18).
Drenkou G. (2007). How to create a measuring system of the LXI standard. Components and technologies. Sant Petersburg, № 2, p. 23-29.
Jochen Wolle. State of the LXI Security Working Group. Technical Software Engineering Plazotta. – Wolnzach, Germany, 2019.
IEEE1588 and LXI. Data Acquisition and Analysis. National Instruments product catalog, 2015, 231 p.
LXI-compatible microcontroller heterogeneous Ethernet-systems of remote technical monitoring: report on research (conclusion). NTUU “KPI”, supervisor. Y.M. Tuz. Kyiv, 2013. 226 p. – D / b № 2521-p
Abstract views: 160 PDF Downloads: 190
Copyright (c) 2021 Oleh Pavlovskyi, Oleh Sova , Volodymyr Koval
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors agree with the following conditions:
1. Authors retain copyright and grant the journal right of first publication (Download agreement) with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors have the right to complete individual additional agreements for the non-exclusive spreading of the journal’s published version of the work (for example, to post work in the electronic repository of the institution or to publish it as part of a monograph), with the reference to the first publication of the work in this journal.
3. Journal’s politics allows and encourages the placement on the Internet (for example, in the repositories of institutions, personal websites, SSRN, ResearchGate, MPRA, SSOAR, etc.) manuscript of the work by the authors, before and during the process of viewing it by this journal, because it can lead to a productive research discussion and positively affect the efficiency and dynamics of citing the published work (see The Effect of Open Access).
